Power Play Caiman Titanium Driver (RH) 9.5° - Clubhead

Power Play Caiman Titanium Driver (RH) 9.5° - Clubhead Reviews

More Picture

See what Golf Tips Magazine said about the Caiman Driver: "At around a 100 bucks, this club is one of the best deals for a driver you'll ever find and produces high moi and great ballflight."

The inspiration of the unique geometry shape is based on the Amazonian Black Caiman. This powerful beast preys mostly on birdies and eagles and is fearless in devouring the competition on golf courses around the globe. Several iterations of this driver were drafted using CAD software until we were able to optimize the CG location for the best results. The elongated breadth, coupled with internal weighting produces an extremely stable, high moment of inertia design for exceptional raw distance and control off of the tee. Rounding out this design is a Physical Vapor Deposition (PVD) coating, creating not only an extremely durable finish, but also providing a lustrous black appearance. The process involves the deposition of titanium carbon nitride under low vacuum conditions. Conforms with USGA Rules.

Click here for more information on the Power Play Caiman Titanium Driver

Go tO Store Now !!

More Products

More Reviews

Bionik 101 Blue Insert Putter (LH) - Clubhead

Bionik 101 Blue Insert Putter (LH) - Clubhead Reviews

More Picture

The Bionik Putter features a soft alloy insert anodized for a striking new look. The zinc body is highlighted with a beautiful tin-nickel finish and contrasting blue precision milled face to ensure superior performance. Requires a straight .370" putter shaft

Go tO Store Now !!

More Products

More Reviews

Dynacraft Avatar Evolution Titanium Driver (RH) 10.5° - Clubhead

Dynacraft Avatar Evolution Titanium Driver (RH) 10.5° - Clubhead Reviews

More Picture

The concept that bigger is better has been the mantra of golfers everywhere. By far, the vast majority of drivers sold today measure at the maximum allowable size (460cc) under the Rules of Golf. It has been proven that as the mass is spread out it increases the forgiveness or that fancy term "moment of inertia" to make off-center shot less penalizing and retain a greater amount of distance and feel. However, there is a right way and a wrong way to spread the mass out.

If golfers could get their hands on a bigger head that was within the rules, believe me they would. This is how the Dynacraft Evolution driver concept was conceived - make better use of the volume and dimensional limits as humanly possible. The Dynacraft Evolution’s footprint would normally result into a volume of 512cc, but with some creativity this driver design is able to stay within the limits.

But that is only part of the story how the Dynacraft Evolution is pushing the envelope by making this our highest moment of inertia driver. Using a new construction technique, we shed weight from the only place possible – the crown area. Our super-thin crown technology allows additional discretionary weight to be at our disposal for even greater forgiveness and at the same time ensures the center of gravity is in the right place to create those high launching, tape measure drives.

Go tO Store Now !!

More Products

More Reviews

Tour Gear Alloy Hybrid (RH) #3 - Clubhead

Tour Gear Alloy Hybrid (RH) #3 - Clubhead Reviews

More Picture

The Tour Gear set is perfect for the player ready to invest into their first set of clubs, but on a limited budget. Economical, yet stylish, these will help to get them started off correctly.

The Tour Gear low profile hybrids will make the ideal substitution for those hard-to-hit long irons.

Click here for more information on the Tour Gear line of golf equipment.

Go tO Store Now !!

More Products

More Reviews

Acer XF HT Iron (RH) #4 - Clubhead

Acer XF HT Iron (RH) #4 - Clubhead Reviews

More Picture

The Acer XF is our latest generation of game-improvement irons to replace our ever-popular Acer XK line that was named Golf Digest's 2009 Best Value iron. More chiseled than its predecessor to garner more a dramatic appearance, we were able to push the center of gravity even deeper (1.4mm) and lower (0.2mm) for improved performance. Another way to put it is the XF stands for extra forgiveness. The non-glare topline has been beveled to provide a less chunky appear at address. The higher launching XF High Trajectory is designed for higher handicappers with a lower center of gravity design.

Go tO Store Now !!

More Products

More Reviews

Acer Mantara Iron (RH) #4 - Clubhead

Acer Mantara Iron (RH) #4 - Clubhead Reviews

More Picture

The Mantara family welcomes its newest addition! Now an iron which extends the concept creating ultra-high MOI to greatly reduce twisting on off-center shots. The Mantara iron removes mass in every conceivable location where it is least needed and redistributes to the low and rear corners of this extreme perimeter-weighted design. The wide sole and twin rear wings provide the accuracy you would expect from a hybrid club, but with the appearance of an extraordinary iron. The large effective hitting area augmented by a radius sole to prevent far shots perhaps making this the most playable club on the market. Flagsticks take cover you have been warned!

Conforms with USGA Rules.

Go tO Store Now !!

More Products

More Reviews

Acer XK Iron (RH) PW - Clubhead

Acer XK Iron (RH) PW - Clubhead Reviews

More Picture

Who ever said a narrow soled design can't be forgiving? The slim profile was carefully selected based on feedback accumulated over years from numerous golfers who didn't want to have that chunky appearance when setting the club behind the ball. Yet these very same players still demanded all the most modern game-improvement features at their disposal to help them lower their scores. From the non-glare topline to the generous offsets allows for the majority of today's players to hit both solid and straight shots to inspire confidence in their game. The Standard Acer XK model could soon be the standard in the industry. Manufactured of 431 stainless steel.

Base price assembled with Apollo Standard steel shaft and Karma Black Velvet Grip.

Go tO Store Now !!

More Products

More Reviews

Acer XB Black Wedge (RH) 64° - Clubhead

Acer XB Black Wedge (RH) 64° - Clubhead Reviews

More Picture

The Acer XB combines the tradition, beauty and elegance of the past you would only expect with a blade style wedge. Starting with a classic teardrop shape, tapered hosel, very minimal offset, thin top line and narrow sole, no attention to detail is left out.

The four-way cambered sole and moderate bounce angles allow for maximum playability from a variety of situations you may encounter on the course. The versatility of the D-grind sole allows for the face to be opened when needed and is good from any lie to produce creative face angle positions for shots like “bump and run” and “the flop” around the green.

Perhaps the greatest attribute is that no other set of wedges are as complete and versatile as the Acer XB wedges. There are as many as 8 different lofts to choose from providing you with total short-game management. Many golfers are content with the standard 52, 56 and 60 degree set up, which we have you covered. We also have the harder, if not impossible to find higher lofted wedges like the 64 and the 68 degree (satin finish only) for the high little delicate shots when you need to have the ball land softly.

With so many pitching wedges being manufactured with 46º of loft, for many golfers it makes more sense to carry 50, 54 and 58 degree lofts instead. This way they have the nice separation in distance without gaps from their game-improvement irons and still cover the majority of shots they will encounter on the course.

The appearance is equally as superb as its performance. The Acer XB Wedges are precision cast in four different finishes: lustrous pearl chrome, an elegant non-glare matte black, brilliant high polish and maintenance-free satin.

Click here for more information on the Acer XB Wedge Pearl Chrome

Go tO Store Now !!

More Products

More Reviews

Acer XK Pro Iron (RH) #7 - Clubhead

Acer XK Pro Iron (RH) #7 - Clubhead Reviews

More Picture

The Pro model features all the important details a better golfer covets in a modern day iron. While this model is still considered a game-improvement design from the undercut cavity to the enhanced heel-toe weighting, the XK Pro has the reduced offset, more compact blade length, beveled sole and thinner topline preferred by better golfers. The elongated hosel length is there to control the trajectory and allow the golfer to work the ball when needed...everything the better golfer expects out of a premium club and perhaps more! Manufactured of 431 stainless steel.

Click here for more information on the Acer XK Iron

Go tO Store Now !!

More Products

More Reviews

New Anodized Aluminum Golf Find The Spine Golf Tool Shaft Club Spine Finder Grip

New Anodized Aluminum Golf Find The Spine Golf Tool Shaft Club Spine Finder Grip Reviews

More Picture

All club shafts look round. In actuality, most are oval shaped. Shafts can very in oval size from 0.001 to 0.006, I have even had some cheaper shafts micrometered out at 0.015 differential. Since they're actually oval shaped, one side is stronger than another (the ends of the oval). Case in point is each shaft has a Spine. This tool will "Find the Spine" for you.

A club will bend the same way each time it's swung. Properly done, a spined club will come back to the same point as you set it up. An unspined club may waver off line a little bit. A spined club can make for a repeatable club response, so that it plays the same way swing to swing, whether you're "Coming out of your shoes" or "half swing", the clubhead returns to the same position time and again.

Free running bearings that will hold up to .700 butt shaft size. The tip bearing is housed in a protective sleeve so you are not just hold a free bearing at the tip of the club. The flange is engraved with "Find The Spine". Just clamp the flange in a vise and you are ready to "spine".

• Made of 6061 Anodized Aluminum (Dyed Red)
• Made in the USA here at our machine shop.

Detailed instruction on how to find the spine of a shaft with every purchase.

Go tO Store Now !!

More Products

• The UCO Clubmaker's Golf Vise & Shaft Extractor
• The Basics of Golf Clubmaking. An Introduction to Golf Club Assembly

More Reviews

Power Play Caiman Iron (LH) #9 - Clubhead

Power Play Caiman Iron (LH) #9 - Clubhead Reviews

More Picture

Big, bad and bold are just some of the words to describe this powerful new iron design. The precision cast 431 stainless steel outer shell creates the foundation by optimizing the deep, rear center of gravity location for the extremely high moment of inertia resulting in superior accuracy and a driving trajectory. It is joined together with a separate high-performance face plate formed by an ultra-thin sheet of high strength 420 specialty maraging steel. This translates into a more explosive ball velocity coming off of the face for the ultimate in distance. From the ultra-wide beveled sole and heavy rear mass to the unique appearance at address, the Caiman Irons put more raw power in your hands to produce shots that you only dreamed of.

Click here for more information on the Power Play Caiman Iron

Go tO Store Now !!

More Products

More Reviews

Acer CB6 Putter (RH) - Clubhead

Acer CB6 Putter (RH) - Clubhead Reviews

More Picture

A cross between a blade and a mallet design, the inverted profile lets us redistribute weight into the two wings as they serve to provide the additional perimeter weighting.

Click here for more information on the Acer CB6 Putter

Go tO Store Now !!

More Products

More Reviews

Acer XF Iron (RH) #3 - Clubhead

Acer XF Iron (RH) #3 - Clubhead Reviews

More Picture

The Acer XF is our latest generation of game-improvement irons to replace our ever-popular Acer XK line that was named Golf Digest's 2009 Best Value iron. More chiseled than its predecessor to garner more a dramatic appearance, we were able to push the center of gravity even deeper (1.4mm) and lower (0.2mm) for improved performance. Another way to put it is the XF stands for extra forgiveness. The non-glare topline has been beveled to provide a less chunky appear at address. The standard XF is designed to fit the broadest range of golfers with ample offset to help the player square up the face at impact enabling the player to hit both straight and solid shots as well as instill confidence in their game.

Go tO Store Now !!

More Products

More Reviews

Acer Mantara Hybrid (LH) #4 - Clubhead

Acer Mantara Hybrid (LH) #4 - Clubhead Reviews

More Picture

The largest hybrids in the line complements the Mantara family with its distinctive look. Utilizing the same concept as the Mantara family, the square profile moves the center of gravity rearward and creates a higher MOI. Designed to replace traditional #3, 4 and 5-irons, these are large volume clubs for maximum forgiveness on off-center shots. The Mantara hybrids will set up much like a fairway wood with the face forward feature and will have a very neutral or straight ball flight, rather than many draw biased designs offered today. Conforms with USGA Rules.

Go tO Store Now !!

More Products

More Reviews

Acer XB Satin Wedge (RH) 58° - Clubhead

Acer XB Satin Wedge (RH) 58° - Clubhead Reviews

More Picture

The Acer XB combines the tradition, beauty and elegance of the past you would only expect with a blade style wedge. Starting with a classic teardrop shape, tapered hosel, very minimal offset, thin top line and narrow sole, no attention to detail is left out.

The four-way cambered sole and moderate bounce angles allow for maximum playability from a variety of situations you may encounter on the course. The versatility of the D-grind sole allows for the face to be opened when needed and is good from any lie to produce creative face angle positions for shots like “bump and run” and “the flop” around the green.

Perhaps the greatest attribute is that no other set of wedges are as complete and versatile as the Acer XB wedges. There are as many as 8 different lofts to choose from providing you with total short-game management. Many golfers are content with the standard 52, 56 and 60 degree set up, which we have you covered. We also have the harder, if not impossible to find higher lofted wedges like the 64 and the 68 degree (satin finish only) for the high little delicate shots when you need to have the ball land softly.

With so many pitching wedges being manufactured with 46º of loft, for many golfers it makes more sense to carry 50, 54 and 58 degree lofts instead. This way they have the nice separation in distance without gaps from their game-improvement irons and still cover the majority of shots they will encounter on the course.

The appearance is equally as superb as its performance. The Acer XB Wedges are precision cast in four different finishes: lustrous pearl chrome, an elegant non-glare matte black, brilliant high polish and maintenance-free satin.

Click here for more information on the Acer XB Wedge Pearl Chrome

Go tO Store Now !!

More Products

More Reviews

Dynacraft Prophet Tour Iron (LH) #4 - Clubhead

Dynacraft Prophet Tour Iron (LH) #4 - Clubhead Reviews

More Picture

For the player heading toward single digits or perhaps already there, this model sports the true appearance of a blade. The distinction is just enough game improvement elements were augmented to give that player the edge to dominate the competition and continue to lower their score. The exclusive Stability Slot optimizes the CG location by pushing the weight further back from the face and redistributes the weight directly in the center of the face for that pure, unmistaken feel only a blade can provide. The Dynacraft Prophet Tour Blade is manufactured from an ultra-soft 304 stainless steel for an incredible feel at impact and finished with an exquisite black PVD coating.

For more detailed information on the Dynacraft Prophet Tour Blade Iron click here.

Go tO Store Now !!

More Products

More Reviews

Dynacraft Prophet CNC Forged Iron (RH) #3 - Clubhead

Dynacraft Prophet CNC Forged Iron (RH) #3 - Clubhead Reviews

More Picture

Bringing together tradition with modern game improvement technology, each Dynacraft Prophet CNC iron starts out as a solid billet of soft 1020 carbon steel. Through a new concept in production techniques, the head goes through a series of several steps where the clubhead is stamped and pressed into a raw, overweight forged blade. Next a computer numerically controlled (CNC) program precisely mills the back of the blade into the exact cavity shape. The milling doesn't stop there as an additional step creates an undercut cavity to allow for a deeper weight distribution found only in cast designs until now! Afterwards, the heads are polished by hand, buffed and chrome plated to provide the treatment of a lifetime. Come see first hand how all game-improvement forged irons will be produced in the future.

See and learn how the Prophet CNC irons are made click here.

Click here for more information on the Dynacraft Prophet CNC Forged Iron

Go tO Store Now !!

More Products

More Reviews